POSTS – SOCIAL – ARTICLES

listen to the report on ozone cleaning

Impact on running costs

Cost assessment report

A bit of humour never hurts

A REAL CLASSIC!!!


When the client asks “why!?” based on incomplete information.
How many times has it happened to you!!
I’m sharing it with you… just to compare notes.
My answer to the question: why!?
Dear Dr Xxxxxxxxxxxxxxxxxxx
I will try to explain, in detail, why I decided to SLIGHTLY reduce the floor area of the incoming cold rooms.
I hope you will hear my side before making your final decision.

Your legitimate question is:
Why are the stock-in cold rooms smaller than we asked for???

1) Because, after carefully assessing daily incoming goods flows, we found that the old cold rooms were oversized compared with the work flows
2) Because, by redesigning and optimising the internal shelving for the new packaging, even though they are smaller we can store 20% more packs
3) Because, having to replace them with new state-of-the-art cold rooms, we noticed that the difference in area between old and new would have meant a significant surcharge unless we used standard panels in the new build.
4) Because using “non-standard sizes” brings an unacceptable extra cost relative to the performance obtained
5) Because, with the saving above, we can buy higher-class kitchen equipment in terms of kg/hour output
6) Because, ultimately, 1.5 gross m³ out of 50 m³ available tells us we can give up 3% of oversized area.
7) With the same final budget, we have now added an automatic fire-suppression system to the kitchen hood.

These are some of the reasons.
Oh, I almost forgot! It might do your kitchen manager good to compare notes with his team, rather than hiding behind …we’ve always done it this way.
Kind regards

The quality of achievable results depends on conscious design. Work is a dynamic system: you will never get the same results if you choose to fit out on experience alone, with a static method. The final results will always be uncertain.